A smaller established town where most of the framing work is additions, basements, garages and renovation rather than new subdivisions.
Devon is not a subdivision market. It is an established town where the majority of framing work happens on houses that were built decades ago. Additions, basement developments, garages, and renovations that involve opening up structure and putting the load somewhere else.
That is genuinely harder than new construction. Nothing is level, nothing is plumb, and what you find behind the drywall is rarely what the original drawings claimed. The work starts by measuring what is actually there rather than what should be there, and planning the transition between old and new deliberately instead of discovering it partway through.
Yes. A basement, a garage or an addition is normal work rather than something that has to be bundled with a bigger project to be worth the trip. Devon is a straightforward run from Edmonton and schedules as part of an ordinary working day.
Yes, and it is common work here. The important part is measuring what the house actually is now rather than trusting original drawings, because decades of settling means the floor and walls you are tying into are rarely still level or plumb.
Yes, but whatever that wall was carrying has to go somewhere else, usually via a beam and a proper load path down to bearing. That often needs an engineered detail. It is not a wall you remove first and work out the structure afterward.
Structural work generally does, and the framing gets inspected as part of it. The permit is between you and the town rather than something we pull. We frame to the approved drawings so the inspection is straightforward rather than a source of delay.
Fastest way to get a number is a phone call with the drawings in front of you. The form works too.
Thanks. We will get back to you shortly. If it is urgent, call 587.938.6601. Plan sets can be emailed to [email protected].